2. SAFETY PRECAUTIONS
WARNING:
Excessively‑high ozone concentration may irritate mucous membranes and lead to symptoms such as shortness of breath and chest tightness. If you smell ozone upon entering the room, immediately verify that the ozone generator has been switched off, ventilate the space, and leave the room.
1.Not intended for use by children.
2.Keep humans and animals out of the treatment zone during operation.
3.Do not operate the unit in high‑temperature, high‑humidity, flammable, explosive, or corrosive environments (e.g. acid, alkali, oil fumes).
4.Never insert foreign objects into the equipment, which may cause equipment damage or fire hazards.
5.Do not cover the heater. Maintain unobstructed, well‑ventilated clearance around the machine.
6.Do not operate the device with wet hands.
7.Switch off and unplug the power supply when the machine is left unattended or out‑of‑service for extended periods.
8.Never rinse the machine directly with water.
9.In case of equipment malfunction, please contact your supplier for support.
3. Advantages of Diatomite Ceramic
3.1 Powerful Odor Elimination (Primary Advantage)
Ozone does not mask odors — it destroys them at the molecular level through oxidation. Effective against:
Smoke (cigarette, fire) – ideal for shock treatments in cars, homes, hotels.
Pet odors (urine, feces, dander).
Cooking smells (fish, grease, spices).
Volatile organic compounds (VOCs) from paints, carpets, adhesives.
Mold and mildew musty odors.
3.2 Disinfection and Microbial Control
Ozone is a broad-spectrum antimicrobial agent. It oxidizes cell walls, causing rupture, and disrupts internal DNA/reproduction. Targets include:
Bacteria: E. coli, Salmonella, Legionella.
Viruses: Influenza, norovirus, SARS-CoV-2 (surface and airborne).
Mold spores: kills on surfaces and in air.
Dust mites: neutralizes allergens.At appropriate concentrations (1–5 ppm air, 0.4 mg/L water), ozone achieves >99.9% reduction in pathogens within minutes.
3.3 Gas-Phase Penetration
As a gas, ozone reaches places that sprays, wipes, and filters cannot. It permeates entire rooms, flowing into air ducts, deep carpet fibers, upholstery, wall cavities, and behind appliances — areas impossible to clean manually.
3.4 Gas-Phase Penetration
Unlike deodorizing sprays or chemical cleaners, ozone leaves no physical residue. After its job, it naturally reverts to breathable oxygen (O₂) within 30 minutes to a few hours. No perfumes, sticky surfaces, or disposal containers.
3.5 Operational Speed and Efficiency
For targeted problems, ozone works much faster than passive methods (HEPA filters, charcoal bags). A single concentrated shock treatment over several hours can eliminate odors that would otherwise persist for weeks, or achieve results impossible with other methods.
4. Cleaning and maintenance
Before cleaning, switch off the device and disconnect it from the power supply. Then gently remove the air intake mesh cover on the back of the device and remove any accumulated dust. Regular cleaning of the ozone generation module helps to maintain proper and stable operation of the device; it is recommended to do this once every 3 months. To do this, switch off the device, disconnect it from the power supply, and then use a screwdriver to remove the eight screws on the left and right sides of the housing. After carefully removing the housing, wipe the metal parts and fan with a clean cloth slightly moistened with alcohol.
If the device will not be used for a long time, store it in a dry place, protected from moisture and dust. The device is equipped with a replaceable fuse located in a plastic holder; if necessary, the fuse can be replaced with a new one with the same parameters.
5. Technical specification
Shell Material |
202stainless steel or SGCC+electrostatic coating |
Fan model |
EC120. or other |
Air Flow |
170m3/H or other |
Timer |
60min,120min or 180min |
Input Voltage |
AC110V/60Hz or AC220V/50Hz |
Output Voltage |
2500-2700V |
Rated Power |
80-150W |
Control Mode |
Manual control or Touch control |
Applying Space |
20-400m2 |
Operating temperature range |
-10℃ to 70℃ |
Operating humidity range |
0% to 65% |
Development History
Patents and certification
We’ve obtained various global certifications including CE, EMC, LVD, RoHS, FDA, MSDS, ISO 9001, IATF16949, SGS and TUV. We also own eight registered trademarks and forty technical patents to support independent R&D.
Our proprietary core technologies run through all product lines: porous ceramics, industrial ceramic components, special glass, metallized ceramics, liquid absorption cotton, ozone generators and silicone goods. All products are manufactured in strict accordance with international quality standards, delivering reliable and high-performance solutions that have gained wide recognition and market trust worldwide.
Package
We adopt scientific and standardized packaging solutions tailored to product characteristics to effectively prevent collision, extrusion, dust and moisture damage. With mature global transportation system and strict shipment inspection procedures, we ensure all products remain intact and stable during long-distance delivery, providing customers with safe, efficient and reliable one-stop logistics service.
Services
Inquiry & Customization
We provide fast and accurate quotation response for all your inquiries. Flexible OEM & ODM customization solutions are available to meet your unique product design, packaging and branding requirements.
Order Quality Control
We keep clients updated with full production progress throughout the whole order cycle. Our QC team carries out strict comprehensive pre-shipment inspection to guarantee all goods comply with your quality standards before delivery.
Customs Document Support
We prepare a full set of standard export documents including commercial invoice, packing list, certificate of origin and other certification papers, to ensure smooth global customs clearance for shipments to all destinations worldwide.
One-Stop Logistics
Multiple shipping methods including sea freight, air freight and express delivery are offered to match your schedule and budget. We supply real-time cargo tracking service so you can monitor shipment status anytime.
Flexible Payment
We support a wide range of secure international payment terms such as T/T, L/C, Western Union and other mainstream cross-border settlement methods to reduce your cross-border transaction risks.
After-Sales Support
Our professional after-sales team offers timely technical and business support all year round. We maintain steady long-term stable supply capacity to fully back up your continuous market sales and project demands.
FAQ
01
Question: Can you produce based on customers’ drawings or physical samples?
Answer: Absolutely yes. We accept technical drawings in all mainstream file formats as well as actual physical samples. Before formal production, our engineering team will provide a full professional DFM feasibility evaluation for your reference.
02
Question: How long is the production lead time for custom orders?
Answer: Sample lead time: 3–7 working days. Custom mold lead time: 5–10 working days (we will confirm the cycle separately with you for complex molds). Mass production lead time: 7–20 working days, depending on product structure complexity and order quantity.
03
Question: What’s your minimum order quantity for custom products?
Answer: We provide flexible MOQ solutions for all customized items. We will try our best to set a low minimum order volume to support your small-batch trial orders, meanwhile we can handle stable mass production to satisfy your long-term bulk demands.
04
Question: What customization services can you provide?
Answer: We support comprehensive one-stop customization, including product size, shape, appearance, precision tolerance, surface treatment, hole grooving, bending, cutting and adjustable high-temperature resistant parameters. Custom engraved LOGO and exclusive customized packaging are also available as extra personalized options upon request.
05
Question: Do you accept third-party inspection of finished products?
Answer: Yes, we fully cooperate with all mainstream authorized third-party testing institutions. Well-known organizations such as SGS, BV and other internationally recognized inspection bodies are all acceptable. We can supply complete official inspection reports and material certification documents as you require.
06
Question: Can you customize raw material options for products?
Answer: Sure. We can select and match appropriate raw materials according to your application scenarios, working conditions and performance requirements, including alumina, zirconia, quartz, silicone and other special engineering materials, and adjust related performance parameters to meet your usage standards.
EN
